UNION OF MIDI AND RELAY CONTROL
The Relay Interface allows you to send relay switch signals with your Morningstar controller. All you need to do is attach the relay interface to one of your controller's Omniports.
Now you can control devices with relay switch inputs even if they don't have MIDI.
Some such devices are:
Delay pedals with tap tempo inputs
Strymon pedals with Favorite switch inputs
JHS pedals with Red Remote inputs
Click here for the Relay Interface manual
NORMALLY OPEN' OR 'NORMALLY CLOSED'
THE CHOICE IS YOURS
You decide if the switch is normally open or normally closed per message sent from your Morningstar controller. This allows the relay interface to work with various devices even if each receiving device has different switching requirements.
TIP, RING OR BOTH
Within each message, you can choose to pull the Tip to Ground, Ring to Ground or Both to Ground.
MULTIPLE CONTROL OPTIONS
TAP (Normally Open) - Momentarily closes the relay and returns back to the open state
TAP (Normally Closed) - Momentarily opens the relay and returns back to the closed state
ENGAGE - Closes the relay
DISENGAGE - Opens the relay
TOGGLE - Alternates between closed and open states
TAKES UP ALMOST NO SPACE
Easily mount the super compact interface under your pedalboard to save precious real estate. Being super lightweight, it will stay right in place.
83mm x 41.5mm x 30mm
9v DC centre negative (min 80mA)
1/4 inch TRS Omniport receive port
1/4 inch TRS relay switch output
Relay Contact Rating:
120VAC or 24VDC at 1A
NEW TO MIDI?
Whether you are new to MIDI or a seasoned expert, we've got you covered
with responsive and extensive support.
Get in touch with us!